SCADA Communications

SCADA Communications are required when direct/wired communications to the remote sites are prohibitively expensive or it is too time consuming to construct wireline communications. CSI manufactures a complete line of products for all your Wireless SCADA needs. CSI has a significant experience in diversity communication media for local and distributed systems such as, telephone line, radio communications, and/or cellular telephone. Every media has its special advantages and CSI will only use and recommend well-proven products for the best results.

We offer wide range of communication services including Leased Line, Land Line, SMS, VHF Radio, and Microwave Systems.

trans

  • 24 VDC POWERED
  • 16 DIGITAL INPUT POINTS PER BOARD UP TO EIGHT TRANSMITTERS MAY BE TIED TOGETHER USING AN MTR-SYNC BOARD TOPROVIDE UP TO 128 TRANSMISSION POINTS.
  • TRANSMISSION OVER 2-WIRE SHIELDED CABLE
    UP TO 5000 FEET IN LENGTH.
  • INDIVIDUAL STATUS LED’S FOR EACH INPUT
  • OPTICALLY ISOLATED DRY CONTACT INPUTS
  • EIGHT (8) TRANSMISSION CHANNELS
  • WORKS IN CONJUNCTION WITH MRC101A
    RECEIVER BOARDS.
  • QUICK-CONNECT PLUGS FOR WIRING
  • BACKPLATE MOUNTED
  • BOARD SIZE: 5.0″ HIGH x 4 1/2″ WIDE

trans2

  • 24 VDC POWERED
  • 16 I/O POINTS PER BOARD UP TO EIGHT RECEIVERS MAY BE TIED TOGETHER TO PROVIDE UP TO 128
    OUTPUTS.
  • RECEIVES OVER 2-WIRE SHIELDED CABLE UP TO 5000 FEET IN LENGTH.
  • INDIVIDUAL STATUS LED’S FOR EACH OUTPUT
  • OPEN-COLLECTOR NPN DARLINGTON TRANSISTOR OUTPUTS.
  • OPTIONAL RELAY OUTPUT BOARD
  • SELECTION OF EIGHT (8) BOARD CHANNELS
  • WORKS IN CONJUNCTION WITH MTR101A TRANSMITTER BOARDS.
  • QUICK-CONNECT PLUGS FOR WIRING
  • LAMP TEST FEATURE
  • BACKPLATE MOUNTED
  • BOARD SIZE: 4 3/4″ HIGH x 4 1/2″ WIDE

tele

  • 120 VAC POWERED
  • LOW POWER USAGE: 3.6 Watts
  • MAX. SHORT CIRCUIT CURRENT: 18ma.
  • SOLID STATE CONSTRUCTION
  • CAN BE OPERATED AS A STANDALONE UNIT OR IN PAIRS FOR TWOWAY COMMUNICATION
  • SIMPLE WIRING AND OPERATION
  • TWO-WIRE OPERATION
  • DRY-CONTACT RELAY OUTPUT
  • BACKPLATE MOUNTED
  • 4signal_toneVOICE GRADE, LEASED LINE OPERATION
  • FULL DUPLEX OPERATION
  • BELL 103 COMPATIBLE
  • FOUR (4) DRY CONTACT INPUTS
  • INPUTS ARE OPTICALLY ISOLATED
  • FOUR (4) DRY CONTACT RELAY OUTPUTS
  • I/O LED STATUS INDICATORS
  • CONTACT CLOSURE ON LOSS OF COMMUNICATION OR POWER FAILURE
  • BUILT-IN SURGE PROTECTION
  • BACK-PLATE MOUNTING
  • 115/120 VAC @ 50/60 Hz POWER